The daily maintenance of the dual head tinning machine is essential and cannot be ignored, as it relates to the efficiency of the machine's daily operation. If necessary maintenance is not carried out for a long time, its service life will be reduced, and even if the quality is good, various small problems will occur as a result. Below, we will introduce the basic maintenance content and how to carry out corresponding maintenance.
1： Basic maintenance of dual head tinning machine
1. Clean the machine daily to remove excess debris and wires from the surface.
2. Check whether the locking screw is loose and whether the spring is deformed before and after operation.
3. Add specialized lubricant for rotating blades at least once a week.
4. Regularly check if the air source pressure is normal.
5. Regularly clean the filter screen at the ventilation opening every month to prevent dust and impurities from flowing back into the interior of the tinning machine.
2： Replacement and maintenance of consumables
1. Add necessary butter every week. The specific operation method is as follows: open the back cover of the terminal machine, remove the clamp ring and the driven pulley, evenly apply butter to the bearing surface, and then close the back cover.
2. After using the dual head tinning machine for 5-6 months, it is necessary to check the wear of the transport belt. If the wear is severe, a new belt should be replaced in a timely manner.
3. Replace the rotating blade every 2-3 months to ensure the sharpness of the blade surface and reduce errors during peeling and tinning.
4. Regularly check the wear and tear of the cutting blade and V-blade, and polish and replace them in real time.
5. Choose wire guide blocks of different sizes according to the different processing wires.
6. Perform overall maintenance on the equipment, such as checking the electrical, gas, and water pressure conditions.
The above is a brief introduction to the basic maintenance of the dual head tinning machine. If you want to learn more about maintenance knowledge, please visit our Dongguan Weihua New Electronics Co., Ltd. for more details.
